Messoa NDR891 Manuel d'utilisateur télécharger pdf (Page 45)

Action

Specify the action to be taken when external alarm is triggered:

 OFF: No action will be taken, but an alarm will be logged.

 FTP: Recorded video clips/JPEG files will be uploaded to a FTP server when alarm is triggered.

 SMTP: Notification e-mail with the recorded JPEG files attached will be sent to a SMTP server.

 SD Card: Recorded video clips will be saved to the SD card when the alarm is triggered.

Note: To perform a video recording, you must select MJPEG codec for one of the streams.

4.5.3 Blur Detection

With blur detection function enabled, when the camera detects incidents that make video image blur, e.g.

redirection, blocking or defocusing, the camera will generate an alarm and then take an action you specify.

Note

: To use the blur detection function, the following two conditions must be met:

1. You must select MJPEG codec for one of the streams to enabl

e the live view.

2. You must select H.264 or MPEG4 codec for one of the streams to process the motion detection.

Basic Settings

 Blur Detection: Specify the level of blur in the video image before the camera triggers an alarm.

The higher the value, the slighter a blur is required to generate an alarm.

When set to OFF, blur detection is disabled.

 Sensitivity: You can alternatively custom the camera’s sensitivity to a blur. The camera will judge

if the camera has been tampered based on the sensitivity threshold you specify.

Action

 OFF: No action will be taken, but an alarm will be logged.

 FTP: Recorded video clips/JPEG files will be uploaded to a FTP server when alarm is triggered.

 SMTP: Notification e-mail with the recorded JPEG files attached will be sent to a SMTP server.

 SD Card: Recorded video clips will be saved to the SD card when the alarm is triggered.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51 52

Pas de commentaire

Messoa NDR891 Manuel d'utilisateur Page 45